DIY Gates
Different size gates are kept in stock with no pins attached. You can purchase the gates to suit your size truck & weld the pins on to suit the holes in the tray. Pins & catches can be supplied as well as different types of gate pockets to suit the tray. You will need to know what type of combing the tray has.
The combing is the steel beam running along the edge of the tray. It may be a channel, RSJ /eyebeam, or a flat bar combing. If it is a flat bar combing, we need to know the overall width of the tray to determine if the gate pockets can go on the outside or have to go on the inside under the floor. The maximum width including the gate pockets is 2500mm.
Supplier of quality gates and load racks to the body building industry & transport companies for over 20 years.
A good tip is when you are travelling empty to lay the gates down as this is when they rattle around and the metal becomes fatigued!
0400 300 827Most sizes kept in stock or can be made to order in a short time. Based in Perth WA |
|
